Magnescale(SONY)轧机辊缝检测器MD50-2N,MD50-4N
With max. response speed 100m/min, comply with shocks of rolled
material.
Comply with world-wide power source : AC100 to 240V
Selectable from 5 kinds of output pulse resolution and 9 kinds of
output pulse width
-Select resolution from 0.5 to 10 μm, output pulse width from 0.1
to 4.0μs.
Can be selected A/B signal or Up/Down signal.
MD50-2N,MD50-4N
满足类似轧辊的瞬时弹震，其*快的响应速度为100m/min
电源：AC 100~240V
有5种输出脉冲分辨率和9种输出脉冲宽度可供选择
分辩率从0.5到10 μm，输出脉冲宽度从0.1到40 μs
可以选择信号输出格式A/B相或Up/Down
采取独立检测板，容易维护，当其中1轴出现故障时不会影响其它轴的正常工作
The MD50 is available as a 2 or 4 axis detector unit intended for
ndoor use (as part of the users 19" rack type, control system).
The MD50 detector receives scale signal from the magnescale
rod& head and determines the movement direction of the scale rod
and emits a pulse signal according to the amount of actual
movement.
Each axis is independent of the other and is set calibrated separately.
Also included is an independent display function for alarm using
digital and anlogue system. TheMD50-2/4STreplaces the earlier
MSD-560 detectorunit.
轧机辊缝检测器MD50-2N,MD50-4N,High reliability and many functions, it
can comply with a variety of equipments.检测器的警报信号输出，能快速判断传感器随使用周期而引起的衰减。除了输出控制总线外,还可用A/B相辅助输出作显示器监控信号。采取独立检测板，容易维护，当其中1轴出现故障时不会影响其它轴的正常工作。MD50-2N,MD50-4N配合磁尺MSS976R及磁头传感器HA705进行AGC/HGC的位置反馈，专用电缆MK3。
上海SPM专业销售Magnescale冶金压延厚度控制器MD50-2N,MD50-4N，信号传输电缆MK3系列，并提供检修标定，保护套定制服务.
