Magnescale(SONY)軋機輥縫檢測器MD50-2N,MD50-4N
With max. response speed 100m/min, comply with shocks of rolled
material.
Comply with world-wide power source : AC100 to 240V
Selectable from 5 kinds of output pulse resolution and 9 kinds of
output pulse width
-Select resolution from 0.5 to 10 μm, output pulse width from 0.1
to 4.0μs.
Can be selected A/B signal or Up/Down signal.
MD50-2N,MD50-4N
滿足類似軋輥的瞬時彈震，其*快的響應速度為100m/min
電源：AC 100~240V
有5種輸出脈沖分辨率和9種輸出脈沖寬度可供選擇
分辯率從0.5到10 μm，輸出脈沖寬度從0.1到40 μs
可以選擇信號輸出格式A/B相或Up/Down
采取獨立檢測板，容易維護，當其中1軸出現故障時不會影響其它軸的正常工作
The MD50 is available as a 2 or 4 axis detector unit intended for
ndoor use (as part of the users 19" rack type, control system).
The MD50 detector receives scale signal from the magnescale
rod& head and determines the movement direction of the scale rod
and emits a pulse signal according to the amount of actual
movement.
Each axis is independent of the other and is set calibrated separately.
Also included is an independent display function for alarm using
digital and anlogue system. TheMD50-2/4STreplaces the earlier
MSD-560 detectorunit.
軋機輥縫檢測器MD50-2N,MD50-4N,High reliability and many functions, it
can comply with a variety of equipments.檢測器的警報信號輸出，能快速判斷傳感器隨使用周期而引起的衰減。除了輸出控制總線外,還可用A/B相輔助輸出作顯示器監控信號。采取獨立檢測板，容易維護，當其中1軸出現故障時不會影響其它軸的正常工作。MD50-2N,MD50-4N配合磁尺MSS976R及磁頭傳感器HA705進行AGC/HGC的位置反饋，專用電纜MK3。
上海SPM專業銷售Magnescale冶金壓延厚度控制器MD50-2N,MD50-4N，信號傳輸電纜MK3系列，并提供檢修標定，保護套定制服務.
