高速通訊模塊MG41-NC,MG41-NE,MG42-2,MG42-4
The MG40 series, with its standard Ethernet interface, enables you
to process and store remote data via 100Mbit/sec high speed
data communication.
Utilizing a single MG41 hub, up to 100 channels can be easily
connected via one network cable.
Ethernet and CC-Link interfaces eliminate the need for BCD or
RS-232C wiring connections.
In the event of a communication error, the system automatically
aquires the correct positional information.
Bi-directional serial digital communication allows for a higher
response speed.
DIN rail compatible (35mm)
The MG40 series intelligent network measurment system enables
high-speed communication, multi-channel measurement and data
management.
The MG40 series communicates with the DK series of gauges via a
true digital communication protocol and does not rely upon analog
or AB phase outputs. Miscounts caused by external noise are
eliminated and the system instantly recovers from communication
errors.
高速通訊模塊MG41-NC,MG41-NE,MG42-2,MG42-4相關參數
高速通訊模塊MG41-NC,MG41-NE,MG42-2,MG42-4
可以與Ethernet設備以10Mbps進行高速通訊遠程處理或儲存數據
可以連接100個探規
高速數據通訊100Mbit/sec
CC-Link,以太網
供電電壓 : 12-24VDC
DIN導軌安裝(35mm)
高速通訊模塊MG41-NC,MG41-NE,MG42-2,MG42-4,MG系列解決了模擬量輸出的傳感器和A/B相輸出的探規需要通過二次儀表進行數據采集和傳輸的問題，所有數據可實現直接全數字化通訊。高速通訊模塊MG41-NC,MG41-NE,MG42-2,MG42-4可以與Ethernet設備以10Mbps進行高速通訊遠程處理或儲存數據，模塊之間連接線纜*長可達10m，主模塊輸出電纜*長30m，測量單元數據輸入頻率10 Mbps數據傳輸*多10000個數據/秒（當連接100個探規時），遠程智能網絡測量系統通過高速通訊，可靈活的進行多點測量和數據管理。數字探規可更換任一連接單元，因外部干擾引起的誤計數及因通訊失敗導致的通訊中斷可自動恢復。
