網絡通訊模塊MG41-NC,MG41-NE,MG42-2,MG42-4
The MG40 series, with its standard Ethernet interface, enables you
to process and store remote data via 100Mbit/sec high speed data
communication.
Utilizing a single MG41 hub, up to 100 channels can be easily
connected via one network cable.
Ethernet and CC-Link interfaces eliminate the need for BCD or
RS-232C wiring connections.
In the event of a communication error, the system automatically
aquires the correct positional information.
Bi-directional serial digital communication allows for a higher
response speed.
DIN rail compatible (35mm)
The MG40 series intelligent network measurment system enables
high-speed communication, multi-channel measurement and data
management.
The MG40 series communicates with the DK series of gauges via
a true digital communication protocol and does not rely upon analog
or AB phase outputs. Miscounts caused by external noise are
eliminated and the system instantly recovers from communication
errors.
高速通訊模塊MG41-NC,MG41-NE,MG42-2,MG42-4相關參數
高速通訊模塊MG41-NC,MG41-NE,MG42-2,MG42-4
可以與Ethernet設備以10Mbps進行高速通訊遠程處理或儲存數據
可以連接100個探規
高速數據通訊100Mbit/sec
CC-Link,以太網
供電電壓 : 12-24VDC
DIN導軌安裝(35mm)
網絡通訊模塊MG41-NC,MG41-NE,MG42-2,MG42-4,MG系列解決了模擬量輸出的傳感器和A/B相輸出的探規需要通過二次儀表進行數據采集和傳輸的問題,所有數據可實現直接全數字化通訊。網絡通訊模塊MG41-NC,MG41-NE,MG42-2,MG42-4可以與Ethernet設備以10Mbps進行高速通訊遠程處理或儲存數據,遠程智能網絡測量系統通過高速通訊,可靈活的進行多點測量和數據。